• CDU 30W Smart Master 24 X IEC C13 & 6 X IEC C19 230V- 32A

The Server Technology® PRO1 Smart PDU provides local LED input current monitoring, allowing IT personnel to determine safe levels of loading on a per-phase basis while installing equipment into the rack/cabinet. The integral PIPS® technology provides billing-grade accurate measurement of current, voltage, active power, apparent power, power factor, crest factor, and accumulated energy at the input. These power data points, along with temperature and humidity measurements (provided via optional probes), are accessible through the built-in Web and CLI interfaces as well as through SNMP. The PRO1 Smart “Master” PDU can be connected to as many as three (with optional module) PRO1 Smart “Link” PDU to extend the network access to the redundant or secondary power feed without the risks of a daisy chain linking configuration.

Key Features

Network Monitoring

  • Gain access to valuable data through connections including HTTP(S), SSH, Telnet, SNMP, (S)FTP, SMTP, Syslog, LDAP(S), RS-232 serial, and more.

Hot-Swap Network Card

  • Network access is ensured when power is lost to the Master unit with backup power provided by the primary link unit.

Star Multi-Linking

  • Provides the ability to link up to four power circuits using one IP address. Primary link provides backup power to network card.

Temperature/Humidity Monitoring

  • Master and Link units each support two external 10' (3m) T/H probes. Receive SNMP-based alerts and email notifications.

Auto-Flip Current Display

  • Easy-to-read LEDs display current per phase to help prevent overloads and simplify three-phase load balancing in high-density cabinets. "Smart"

Per-Inlet Power Sensing

  • Meets ANSI C12.1 for billing-grade accuracy of Current per phase. PIPS includes voltage, active power, apparent power, power factor, and energy.

Branch Circuit Protection

  • This PDU meets the UL and IEC 60950-1 requirement for branch circuit protection through use of UL489 rated magnetic-hydraulic circuit breakers or UL248 fuses.

High Retention Locking Outlets

  • Receptacles have high retention and are compatible with P-Lock type power cords.

High Temperature Rating

  • This product has been tested and approved for safe and reliable operation in 60 °C data center environments.

Power Pivot™

  • The 90 degree rotatable power cord allows for standardized deployment at any facility no matter where power must be routed

Flexible Mounting

  • Includes standard button mounts along with provisions for custom mounting brackets (contact Server Technology for details).

Color Identification

  • Choose from six colors to designate circuits for rack PDUs in the data center. Color options include Blue, Red, Green, White, Yellow, and Black.

Cisco EnergyWise¹ Compliant

  • Meets the requirements set forth by Cisco Systems, Inc. for its EnergyWise program for monitoring of device energy.

 


 INPUTS

Input Voltage (V)

230

Input Plug

IEC 230V/32A 2P+PE 6Hr

Input Current (A)

32

Input Current Rated (A)

32

Input Power Capacity (kW)

7.3

OUTPUTS

Connector

Rating

(24) x IEC 60320/C13

Global Rating: ≤ 10A @230V L-N

(6) x IEC 60320/C19

Global Rating: ≤ 16A @230V L-N

Branch Circuit Protection

  • UL498 Compliant 2-pole, 20A trip circuit breakers, two (2) branch, rating: ≤ 16A, 5 kAIC Interrupt Rating

Physical 

  • Dimensions: 60.0in tall x 1.75in wide x 2.25in deep [1524mm x 45mm x 58mm] 

 Environmental 

  • Operating Environment: 32°F to 140°F / 0°C to 60°C | 8%RH to 90%RH non-condensing | 6,500ft/2km elevation
  • Storage Environment: -40°F to 185°F / -40°C to 85°C | 8%RH to 90%RH non-condensing | 50,000ft/15km elevation Quiescent / Unloaded Power Draw: < 10W for all configurations 

Communications & Security

  • 10/100 Mbps Ethernet (RJ-45 connector), RS-232 serial (RJ-45 connector)
  • Two (2) temperature/humidity sensor inputs (4P4C), Link port (RJ-12) - {also on Link PDU} Web-browser GUI and command-line interface (CLI): HTTP/HTTPS, TLSv1.2, SSHv2, Telnet, SNMPv2c and v3 (GET, SET, Traps), IPv4 and IPv6, LDAPv3/LDAPS, TACACS+, RADIUS, FTP/SFTP     

Certifications

Global:

  • TUV T-Mark to EN 60950-1:2006+A11+A1+A12+A2
  • EMC to EN55024 (2010) and EN55032 (2012)
  • CE Compliant
  • RoHS, European Hazardous Materials Directive (Recast) 2011/65/EU
  • WEEE Compliant 

Measurement Accuracy
Input Measurement Accuracy:

  • LED Current = ± 10% at 0.1 amp (0.3 - 9.9 amps) and 1 amp (> 9.9 amps) resolution
  • GUI Current = ± 1% at 0.01 amp resolution (above 0.25 amp)
  • Voltage = ± 1% at 0.1 volt resolution (nominal ± 10%)
  • Active Power = ± 1% at 1 watt resolution
  • Apparent Power = ± 1% at 1 volt-amp resolution
  • Power Factor = ± 3% at 0.01 resolution
  • Crest Factor = ± 10% at 0.1 resolution
  • Energy = ± 1% at 0.1 kilowatt-hour resolution

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

CDU 30W Smart Master 24 X IEC C13 & 6 X IEC C19 230V- 32A

  • 4,005.00AED

* Required fields


Related Product

Three-Phase Network Analyser - Class A

Three-Phase Network Analyser - Class A

Main Specifications: Voltage input: 3 channels: 0-275/400 VRMS (400/690 V available as an optio..

Power Logger PEL103 MA193 with Digital Display

Power Logger PEL103 MA193 with Digital Display

Accuracy class: 0.2 %Number of channels: 3 Voltage inputs, 3 Current inputs (calculation of neutral ..

Power and Quality Analyser - Single-Phase

Power and Quality Analyser - Single-Phase

SINGLE-PHASE POWER AND QUALITY ANALYSERThe C.A 8230 is designed for self-employed electric..

Power and Motor Maintenance Analyser

Power and Motor Maintenance Analyser

POWER AND MOTOR MAINTENANCE ANALYSER Geared firmly towards the world of electrical engineering ..