• Cabinet 42U W800 D1000mm Front Glass/Rear Steel W/ AC- 7035

The OPTIMAL ROF rack is designed to cope with the demanding needs of IT equipment within a data center, equipment room and network or telecommunications closet. ROF’s flexible configuration options mean that it’s easy to tailor the solution to your exact requirements. Various height, depth and width options, along with a load rating of up to 1000 kg, airflow optimization solutions and flexible cable management mean that it has never been easier to custom configure a cabinet that meets your requirements.

Cabinet Configuration Details






800 mm


1000 mm


L-type undivided extrusions

Front Door

Glass Door

Front Door Lock

Swivel handle DIN profile, universal key, 333, multipoint

Rear Door / Panel

Sheet steel door

Rear Door / Panel Lock

Swivel handle DIN profile, universal key, 333, multipoint

Side Panels (Both Sides)*

No side panels

IP Rating

A/C ready**


Top & bottom plates – Integral

Load Rating

800/1100 (kg)
Note: standard for racks height 42 – 48U; depths 600, 800, 1000 mm; width 800 mm only 800 kg when High load extrusions are not used


RAL 7035 (light gray)

**Ready for A/C unit installation; recommended when cooling is planned or required; IP54 when A/C unit installed according to instructions* open side / sides results in no IP protection; side panels with perforation result in protection rating IP20 max.

General  Optimal ROF Cabinet Description


  • Height: 15, 18, 21, 24, 27, 33, 36, 42, 45, 48U
  • Width: 600, 800 mm
  • Depth: 600, 800, 1 000, 1 200 mm (only for 42U)


  • Welded-frame design
  • 1.5 & 2.0 mm sheet steel

Load rating

  • Standard 300 kg (15‑33U), 400 kg (36U) and 500 kg (42‑48U) for 600, 800 and 1 000 mm deep racks
  • Standard 1 000 kg for 1 200 mm deep racks
  • 19" vertical extrusions
  • 2 pairs of sliding 19" extrusions, adjustable from inside

IP rating

  • Standard IP30
  • Optionally IP54 (required for A/C unit installation) with multipoint lock only
  • IP20 when perforated doors used


  • Standard RAL 7035 and 9 005
  • Optionally other colors

Front door

  • Tinted security glass door
  • Swivel handle lock assembly – single or multipoint, optionally cylinder or combination lock (other locks on request)
  • Door opening angle 1 800
  • Easy re‑hanging to open on right or left
  • Optionally steel, vented, perforated, glass with perforation, vertically divided door

Rear panel

  • Removable with module for cable entry
  • Can be replaced by multiple door options

Side panels

  • Removable with locks Cable entries (300×100 mm)
  • Top, bottom and rear plate
  • 800 mm wide racks have additional cable entries in top and bottom plate
  • All cable entries covered by removable blank panels

Ventilation unit openings

  • Top, bottom plate
  • All ventilation unit openings covered by removable blank panels


  • Adjustable feet as standard; castors, lockable castors, plinth, or plinth with filter options Adaptation
  • Possibility to adapt for installation of 21" equipment (on request only for 800 mm width)
  • Adaptor DP‑RE‑01 needed (ordered separately)


  • Racks can be installed in blocks by using DP‑DR‑UNI (ordered separately)
  • GND/earthing kit included

Write a review

Please login or register to review

Cabinet 42U W800 D1000mm Front Glass/Rear Steel W/ AC- 7035

Related Products

Door 26U 600mm Flat 67% Perforated

Door 26U 600mm Flat 67% Perforated

Perforated Flat Doar Material : 1.2 mm Steel Color      :  RAL 9005 (Black) Finish     : Electrost..

AED 475.00

42U 19'' DYNAMIC W=600mm and D=800mm

42U 19'' DYNAMIC W=600mm and D=800mm

DYNAmic series Networking / Servering Enclosures, provide maximum optimization resulted to an optimum performance in between qualit..

AED 2,173.00

Cabinet Server 27U W600 D1000 With Back Door S/Bolted

Cabinet Server 27U W600 D1000 With Back Door S/Bolted

DAFCAB racks are designed for installing patch panels, active components, servers etc.Description of Free Standing RacksAvailable in sizes 15 - 45U600..

AED 1,536.00

Inorax-10 Outdoor Cabinet

Inorax-10 Outdoor Cabinet

 Technical Specifications Material Frame : Extruded aluminum, Doors and panels: Double layer aluminum/ stainless steel/ga..

Send Price Request