Inner conductor : 99,99% pure electrolitic annealed bare copper. (annealed = thermal softening process) Cu Ø 2,76 mm
High pressure physical injection foamed polyethylene .Triple layer dielectric: FPE Ø 7,3 ± 0,05 mm
The copper foil has an applied PE-coating, placed in order to prevent foil cracking due to short radius bends. Screening percentage 100% CU-POL
High resistance copper screen (Cu) made by means of 24 spools braiding machines. (50% more crossovers if compared to traditional 16 spools machines.) This braid is high effective against low frequency impulsive noises. Screening percentage: 71% 144 wires
Black protective PVC jacket, waterproof and UV resistant. This cable can be laid underground. The red PE jacket clearly shows potential cracks on the above external sheath. (which might occur during pulling on rocky and rough environments).

Electrical Data

Impedance @200MHz:	50 Ohm ± 3
Multiple bends/single bend	124/80 mm
Temperature: installation operative	-40° to +60° C -55° to +85° C
Capacitance	74 pF/m ± 2
Velocity ratio	85 %
Screening efficiency	100-2000 MHz >105 dB
Class	A++
Inner conductor resistance	3 Ohm/Kmq
Outer conductor resistance	9,2 Ohm/Km
Tension test (spark test)	8 kV
Weight (100m)	17 Kg
Maximum peak power	14500 WATT

ATTENUATION at 20°C