• SWIFT R5  for Ribbon Fiber

The Swift R5’s simple and user-friendly design enables users to splice quickly and conveniently throughout the 5 processes;

stripping, cleaning, cleaving, splicing & sleeving. (ALLINONE) One more thing, Swift R5’s thermal automatic stripper leaves

no scratches while a manual stripper scratches on fiber very much.Also, there is no feeling of fatigue that occurs after using

manual strippers even several times.Swift R5 is a way on future splicers.

Benefits & Features

  • No scratches from heated stripping.
  • Over one million life cycles of the motor.
  • Over 5kg/f Tensile Strength of fiber after stripping.


  •  One-touch pump.
  •  Easy to refill cleaning alcohol.


  • Single-action cleaving.
  • Fiber chip collector attached.
  • Internet 4.3-inch Color LCD Monitor with Touch Screen.

Internet remote access maintenance

Internet 4.3-inch Color LCD Monitor with Touch Screen

  • Magnification : 20X.
  • User-friendly and ergonomically designed by navigational touch screen.

 Resistance to Shock, Dust and Water

  • The splicer with high reliability has stable performance even in a harsh environment.
  •  l Shock – Free Fall : 76cm from 5 sides l Waterproof : IPx2 l Dustproof : IP5x.

Powerful Lithium Polymer Battery with Large Capacity

  •  More than 320 times for full cycling of splicing and sleeving when fully charged.


  • Detects the temperature, the humidity, the pressure automatically to calibrate the ARC discharge properly.

Equipped with Sleeve Loader to Prevent Contamination and to Provide Convenience

  • Prevents the supplementary sleeve from contamination and falling.

Built-in Dual Sleeve Heater

  • Productivity would be increased up to 30% due to a simple & user-friendly design.
  • The dual-heater can work for both Fiber to Fiber and Fiber to Swift Connector.





 Fiber alignment

 Fixed V-Groove(Clad to Clad)

 Applicable type of fibers

 SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655)

 Fiber count

 Single fiber, 2~12 fiber

 Applicable fiber dimensions

 Single: Cladding diameter 125, Coating diameter 250, 900

 Ribbon: Cladding diameter 125, Ribbon fiber thickness 0.27 to 0.32mm

 Fiber setting and cleaved  length


 Splicing modes

 Splice mode: 100, Heat mode: 50

 Typical Splice Loss

 SM: 0.05dB, MM: 0.02dB, DS: 0.08dB, NZDS: 0.08dB

 Return Loss

 > 60dB

 Splicing Time

 Typical 20sec with standard SM(ITU-T G.652)

 Splice loss estimate


 Sleeve heating time

 30sec, 50sec

 Applicable protection sleeve

 40, 60mm(fiber)

 Storage of splice result

 The last 10,000 results to be stored in the internal memory.(Image 10,000  results)

 Tension test

 2N / 4,4N(Option)

 Operating condition

 Altitude: 5,000m above sea level, Temperature: -10~50,Humidity: 0~95%,

 Wind: 15m/s, non-condensing, dust proof, water proof, shock proof

 Storage condition

 Temperature: -40~80, Humidity: 0~95%


 142(W)225(L)132(H)mm(Including rubber)


 2.5kg(Including battery 3.2kg)

Viewing method and display

Two CMOS cameras and 4.3-inch color LCD monitor with touch panel


Standard Package




 Arc Fusion Splicer



 AC Adapter


Write a review

Please login or register to review

SWIFT R5 for Ribbon Fiber

Related Products

SWIFT K7  Core to Core Alignment

SWIFT K7 Core to Core Alignment

Swift K7 is the advanced typical core alignment type fusion splicer for the medium & long range optical circuit LAN, CATV, FTTx with w..

Send Price Request

Stabilized Light Source  Singlemode 1310/1550/1625

Stabilized Light Source Singlemode 1310/1550/1625

The compact and rugged Stabilized Light Sources from Tempo round out the latest fiber tool offerings—delivering a stable light source which is criti..

Send Price Request

Blown Fibre Duct Cutter 0-22mm

Blown Fibre Duct Cutter 0-22mm

A heavy duty plastic duct cutter with PTFE coated blade for precision cutting of ducts up to a diameter of 22mm with minimal effort. This tool incor..

Send Price Request

Blown Fibre Bead Crimper

Blown Fibre Bead Crimper

A specialist crimping tool for attaching fibre blowing leader beads to fibre prior to installation. Suitable for crimping bullets&..

Send Price Request