• Smart CS-12HD2/E 20-30A/16-32A 208-240/230V (12) C19

The Sentry CS-12HD2/E products provide twelve IEC 60320 C19 outlets for high density applications found in data

center cabinets. Smart Cabinet Distribution Units (CDU) provide reliable single phase power distribution combined

with local and remote power monitoring and environmental monitoring via IP.

Increasing power demands and density in the equipment cabinet requires new functionality from your cabinet PDU.

The Sentry Cabinet PDU product family uniquely meets these demands.

This Sentry PIPS CDU provides the ability to provide power monitoring per inlet/infeed. Power information per infeed

includes current, voltage, power, apparent power, crest factor, reactance, power factor and accumulated energy.

This information replaces branch circuit monitoring devices typically installed in the power distribution panel or remote

power panel (RPP) with higher accuracy and lower cost monitoring of each circuit attached to the CDU.

Combine the Sentry PIPS Smart Cabinet PDU with the Sentry Power Manager software tool to gain power usage information

across multiple Cabinet PDU's individual IP address.

230 V products include a EN 60950-1:2001 certification.


Sentry Cabinet PDU Specifications
Item # Available Input
Rated Amperage Available Input Cord Outlets Dimensions
(L x H x D)
CS-12HD2/E 200-240V with PIPS
50/60 Hz
20A (2) NEMA L6-20P Plug, 10'(3m) Cords (12) IEC 60320/C19 3.50 x 17.20 x 10.00 in.
(89 x 437 x 254 mm)
50/60 Hz
30A (2) NEMA L6-30P Plug, 10'(3m) Cords (12) IEC 60320/C19 3.50 x 17.20 x 10.00 in.
(89 x 437 x 254 mm)
16A (2) IEC Blue 2P+G Plug, 10'(3m) Cords (12) IEC 60320/C19 3.50 x 17.20 x 10.00 in.
(89 x 437 x 254 mm)
32A (2) IEC Blue 2P+G Plug, 10'(3m) Cords (12) IEC 60320/C19 3.50 x 17.20 x 10.00 in.
(89 x 437 x 254 mm)
* CL refers to the Expansion Module
Additional Features and Specifications
> cTUVus - UL 60950-1-2003
> CAN/CSA 22.2 No. 60950-1:2003
> TUVGS - EN 60950-1:2001
> FCC Class A, Part 15
> CE
> EMC-EN 55022 Class A, EN 55024

> 10/100 BaseT Ethernet
> SSLv3/TLSv1
> SNMPv2
> SSHv2
> Telnet
> LDAPv3 and LDAPS
> RS-232 (Serial)

Branch Circuit Protection
> Compliant to UL 60950-1

> Temperature & Humidity Probe 
- EMTH-1-1 Temperature & Humidity Probe, 10 ft (3 m)
> EMCU-1-1B add 2 additional Temperature & Humidity ports, 4 contact-closure monitoring ports and 1 water sensor port

Remote Power Monitoring

Monitor input power via IP or serial interface.

HTTP/HTTPs Web Configuration & Control

Use the Sentry Web interface to configure each unit's network settings. SNMP traps for environmental & power thresholds and firmware

updates. Also use the Web interface to monitor key values, including amperage load(s), temperature/humidity and other environmental

conditions. SSL security provides a secure HTTPs connection.

SNMP Management & Event Notification

The Sentry family of products supports the Simple Network Management Protocol (SNMP). This allows network management systems to

use SNMP requests to retrieve information such as input power, temperature and humidity. The Sentry includes an SNMP v1 agent supporting

standard MIB I and MIB II objects. A private enterprise MIB extension (Sentry3 MIB) is also supported to provide remote power control. SNMP traps

can be generated for various events, including Input Current Load Thresholds (min & max), Temperature Thresholds (min & max), Humidity

Thresholds (min & max), water indication, and closed contacts (cabinet doors open/close).

2U Enclosure

A horizontal enclosure that occupies 2U horizontal rack space in the equipment cabinet. It typically mounts on the back of a 19 or 23 inch rack.

Secure Access - SSH or SSL Protection

Secure Shell (SSH), known as Secure Socket Shell, is a Unix-based command interface and protocol for securely getting access to a remote d

evice. Sentry supports SSHv2. Secure Sockets Layer (SSL) is a commonly-used protocol for managing the security of a message transmission

on the Internet. SSL is an integral part of most Web browsers (clients) and Web servers. Sentry supports SSLv3/TLSv1.

Integrated Temp/Humidity Probe Support

Two (2) RJ-style connectors located on the face panel of the PDU's enclosure provide support for two (2) Integrated Temperature & Humidity

Probes with ten-foot (10') cables provide real-time measurements in the data center cabinet.

Firmware Flash Upgradeable

Access new firmware updates via FTP for new firmware features and code releases. An update to the firmware does not affect the status

of the power outlets.


The sentry family of products supports Lightweight Directory Access Protocol (LDAP) Version 3 including LDAPS (LDAP over TSL/SSL). This

support enable authentication with LDAP servers; user accounts do not need to be individually created locally on each Sentry device.

This allows administrators to pre-define and configure (in each Sentry product, and in the LDAP server) a set of necessary LDAP groups, and

access rights for each. User's access rights can then be assigned or revoked simply by making the user a member of one or more pre-defined

Sentry LDAP groups. User account can be added, deleted, or changed in the LDAP server without any changes on individual Sentry products.

Sentry LDAP support has been tested in the following environments:

  • Microsoft Active Directory (MSAD)
  • Novell eDirectory (eDir)
  • Open LDAP

RS-232 Control

Serial control via any device with a bi-directional serial port, including a PC, laptop, KVM switch, Console Port Access switch, or terminal server.

Write a review

Please login or register to review

Smart CS-12HD2/E 20-30A/16-32A 208-240/230V (12) C19

  • AED 6,900.00

Related Products

Switched CW-8H2 20-30A/16-32A 208-240V/230V (8) C13

Switched CW-8H2 20-30A/16-32A 208-240V/230V (8) C13

The Switched Cabinet PDU 8H2 combines remote configuration and management with power distribution, power monitoring and environmental monitoring. Rebo..

AED 3,310.00

 KVM Switch Cable PS2 6m

KVM Switch Cable PS2 6m

Product FeaturesPC Connector: HDB & PS/2 Console Connector:3 in 1 SPHD(Keyboard/Mouse/Video) Length:6m (Slim) Specifications ..

Send Price Request

Metered STV-2001 16A, 230V, 50/60Hz - (24) C13 & (6) C19

Metered STV-2001 16A, 230V, 50/60Hz - (24) C13 & (6) C19

The STV-2001 product family takes Metered power distribution to a new level. The Power Pivot flexible infeed provides simplified power cord routing to..

AED 2,680.00

Switched STV-4304 16/32A 230/400V 3-Ph (36) C13 & (12) C19

Switched STV-4304 16/32A 230/400V 3-Ph (36) C13 & (12) C19

The STV-4304 Switched Cabinet Distribution Unit (CDU) provides reliable power distribution for high density applications that require 3-Phase, 16-Amp,..

AED 13,800.00