• SWIFT K7  Core to Core Alignment

Swift K7 is the advanced typical core alignment type fusion splicer for the medium & long range optical circuit

LAN, CATV, FTTx with world-fastest in splicing & sleeve heating time. It delivers high precision performance with low loss.

Benefits &  Features

Internet remote access maintenance. 

 

IPAAS Technology Basis Core Alignment.

  • Swift K7 is the core alignment splicer based on the IPAAS (Image Pattern Analysis Alignment system)Technology

 

Automatic fiber recognition

  •          SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655),
  •          SM(ITU-T G.657 A2/B2), SM(ITU-T G.657 B3)

Fastest splice time in industry

  •  Splicing Time : 6sec (Quick Mode)

Fastest heat time in industry

  • Tube heat : Typical 9sec (IS-45 Sleeve, IS-60 mode)  l  Typical 13 (IS-60 Sleeve, IS-60 mode)

User friendly GUI 

Resistance to Shock, Dust and Water

  •  The splicer with high reliability has stable performance even in a harsh environment
  •  l Shock-Free Fall : 76cm from 5 sides l Waterproof : IPx2 l Dustproof : IP5x

Powerful Lithium Polymer Battery with Large Capacity

  • Performs 300 cycles of fusion splicing and sleeve heating with the standard battery

4.3-inch Color LCD Monitor with Touch Screen

  • Magnification : 220X, MAX : 700X
  • For user’s convenience, LCD monitor has been designed with touch screen in addition to the operation keys.

Bidirectional Operation System

  •  For user’s ergonomic preference, the screen can be turned around for one’s chosen viewing direction.

Equipped with Sleeve Loader to Prevent Contamination and to Provide Convenience

 

  • While working in a manhole, the loader prevents the supplementary sleeve from falling and being contaminated.
  • Working in aerial space such as telephone pole, the loader also prevents the supplementary sleeve from falling down.

Built-in Dual Sleeve Heater

  •   Productivity would be increased up to 30% due to a simple & user-friendly design.
  •   The dual-heater can work for both Fiber to Fiber and Fiber to Swift Connector

Auto-Calibration

  •   Detects the surrounding environment of temperature, humidity, air pressure and measures

 discharge calibration rate automatically. 

  •  Compatible with Fusion Splice-On Connector(SOC) in accordance with the Industrial Standard

 

Specifications

 

Category

Description

 Fiber alignment 

 IPAAS core to core alignment(Image pattern analysis alignment  system)

 Applicable type of fibers

 SM(ITU-T G.652), MM(ITU-T G.651),DS(ITU-T G.653),

 NZDS(ITU-T G.655), ITU-T G.657

 Automatic fiber recognition

 SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653),

 NZDS(ITU-T G.655),SM(ITU-T G.657 A2/B2),SM(ITU-T G.657 B3)

 Fiber count

 Single fiber

 Applicable fiber dimensions

 Cladding diameter: 80 ~ 150, Coating diameter: 100 ~ 1000

 Fiber setting and cleaved   length

 250: 8~16mm

 Splicing modes

 Splice mode: 300, Heat mode: 100

 Typical Splice Loss

 SMF: 0.02dB, MMF: 0.01dB, DSF: 0.04dB, NZDSF: 0.04dB

 Return Loss

 > 60dB

 Splicing Time

 Splice: Typical 6sec(Quick mode)

 Splice loss estimate

 Available

 Sleeve heating time

 Typical 9sec (IS-45 Sleeve, IS-60 mode)

 Typical 13sec (IS-60 Sleeve, IS-60 mode)

 Applicable protection sleeve

 40mm, 45mm, 60mm (fiber), 32mm or 28mm (Connector)

 Storage of splice result 

 The last 10,000 results to be stored in the internal memory.

 (Image 10,000 results)

 Tension test

 2N / 4.4N(Option)

 Operating condition

 Altitude: 0~5,000m above sea level, Temperature: -10~50,  Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water  proof, shock proof

 Storage condition

 Temperature: -40~80, Humidity: 0~95%

Write a review

Please login or register to review

SWIFT K7 Core to Core Alignment


Related Products

Light Source 850nm With SC Adapter

Light Source 850nm With SC Adapter

The LS-800 optical Light Source is a small size low cost item which fulfils all necessary technical field equipment requirements. Available in seven w..

AED 6,040.00

SWIFT KR7  for Ribbon Fiber

SWIFT KR7 for Ribbon Fiber

Swift KR7 is the advanced typical ribbon splicer that can proceed the maintenance via internet. And it can take user-friendly GUI for user conv..

Send Price Request

Compound 16A

Compound 16A

Compound 16A is single component non curing mastic specifically formulated for sealing against gas and waterin underground ducts carrying telephone ..

Send Price Request

MasterClass Cable Scissors 138mm

MasterClass Cable Scissors 138mm

Scissors for cutting copper cable and also be used cutting Kevlar® strength members found in fibre optic cables. The serrated scissor blades redu..

Send Price Request